The following study shows the thermal interaction between the foot and the floor, using an infrared camera to view thermography.
Results show that cork flooring has the greatest warming impact on your feet.
This is because each square inch of cork has millions of sealed air filled cells, making cork soft, warm and brilliant for sound proofing.
Your tiles are pre-finished to order in our factory here in NZ, which means each tile is crafted especially for you. Custom colours are available to match paint samples, or you can choose from our popular range of colours. Our cork tiles come from Portugal, he home of cork, which we pre-finish with a water-borne polyurethane low in VOCs and an ‘R Factor’ of 2.6.
Cork flooring is sold by the square metre in the following sizes:
300 x 300 x 6mm
450 x 450 x 6mm
600 x 300 x 6mm
900 x 150 x 5mm planks
Coloured cork tiles come with a 1mm bevelled edge, while raw (traditional) cork tiles are square edged.
Pre-finished cork tiles require no sanding. The final coat is with either, Gloss, Silk Matt (lo-sheen) or Matt.
Coloured cork tiles are coloured to order and we aim to have your tiles delivered to you within two weeks of ordering.
For further information & laying instructions please CLICK HERE.
10-year Residential Structural Cork Flooring Limited Warranty – Click HERE to download
Below you will find recommendations on how best to keep your Cork Concepts floor looking good now and into the future.
- A floor coated with poleurathaine is usually “touch” dry within 2-3 hours. However the floor coating is still curing at this stage.
- As a general rule wait 8 hours after the application of the top coat before walking into the room. Your floor can receive light foot traffic at this stage.
- Wait at least 72 hours before moving in furniture and exposing the floor to full use.
- Do not cover, place mats or use maintenance products on your floor for two weeks after application.
- Excess moisture on the floor should be avoided at all times. Remove spillages immediately.
- Remember to put protective pads on the feet of all furniture to avoid marks.
- Placing of mats at the entrance door is important. A mat placed externally and internally will remove dirt, grit and moisture from the feet of people entering your home. This will prevent material scratching and wearing away the finish film.
- Dirt and grit can be removed with a vacuum cleaner but your floor will need a more thorough clean from time to time.
- To ensure the long life of your cork flooring, always use cleaning and maintenance products specially designed for polyurethane coated flooring. Do not use abrasive cleaners.
Following these guidelines and using maintenance products designed for your Cork floor will help to extend the lifetime of your floor and bring out the best in it.